精密寬頻開爾文電橋的研制

黃璐[1]
張鐘華[2]
趙偉[1]
李正坤[2,3][1]清華大學電機系,北京100084
[2]中國計量科學研究院,北京100013
[3]西安交通大學電氣工程學院,陜西西安710049摘　要:為了在直流到100kHz的寬頻范圍內能精密測量、校準交流電阻國家標準中1Ω～10kΩ的交流標準電阻器，研制出一款交直流通用的開爾文電橋；并采用替代法，以考察100Ω、1kΩ雙螺旋線繞結構交流標準電阻器的頻率特性為例，試驗驗證了所研制的電橋具有準確度高、操作簡單及工作頻帶寬等優點，達到了所需的技術指標要求。[著者文摘]

Development of a Wide-range AC Kelvin BridgeHUANG Lu , ZHANG Zhong-hua , ZHAO Wei , LI Zheng-kun1. Department of Electrical Engineering, Tsinghua University, Beijing 100084, China; 2. National Institute of Metrology, Beijing 100013, China; 3. School of Electrical Engineering, Xi＇an Jiaotong University, Xi＇an, Shaanxi 710049, ChinaAbstract:For the accurate t and calibration of the AC standard resistors in the resistance range from 1 Ω to 10 kΩ, a new type of Kelvin bridge operating at the frequency range from DC to 100 kHz is designed, and a measuring method of substitution is developed. The experimental results of 100 Ω and 1 kΩ standard resistor prove that this bridge takes some advantages, such as high accuracy, simplicity of operating and wide working frequency range, which has already met the specification requirements of the Subject of ＂The National AC Resistance Standard＂.[著者文摘]

Key words:Metrology; Wide-range Kelvin bridge ; AC/DC calculable resistor; Method of substitution