電子式電流互感器校準系統不確定度評定方法

尚秋峰[1] 張靜[1] 董建彬[2]

[1]華北電力大學電氣與電子工程學院,河北省保定市071003
[2]石家莊經濟學院信息工程學院,河北省石家莊市050031

摘　要:電子式電流互感器的研究已經進入實用化階段，其校驗和測試工作也引起了廣大研究人員的關注。文中利用計量學中的不確定度理論，對校準系統不確定度進行來源分析，給出電子式電流互感器校準系統整體不確定度的評定方法，由LabVIEW開發的虛擬儀器來實現，并對2個不同校準系統進行了不確定度比較。通過對校準系統進行不確定度評定，不僅能夠評價測量結果的可信度，為使用者提供科學的參考依據，而且也可以為不同的校準系統提供可比性參數。[著者文摘]

Evaluation of Measurement Uncertainty for the Calibration System of Electronic Current TransformerSHANG Qiufeng , ZHANG Jing , DONG Jianbin 1. North China Electric Power University , Baoding 071003, China; 2. Shijiazhuang University of Economics, Shijiazhuang 050031, ChinaAbstract:A study on the electronic current transformer has already been entered into practical application, and its verification and the test work have also attracted attention of researchers concerned. Using the measurement uncertainty theory of metrology, the uncertainty source is analyzed, the measurement uncertainty evaluation method for the calibration systems of electronic current transformer is given and implemented with the virtual instrument developed by LabVIEW. An example of the uncertainty comparison of two different calibration systems is given. With uncertainty evaluation to the calibration system it can not only provide the confidence of the measurement result of the calibration system, and used as the science reference for the user, but also can provide comparable parameters for different verification systems.[著者文摘]

Key words:ratio error; phase error; calibration system; measurement uncertainty; evaluation