解決Met/Cal gold procedure 安裝時MCZ無法找到問題

今天終于找到了“Met/Cal gold procedure 安裝時MCZ無法找到”的解決方法，困惑了許久了，終于得解，開心！急著想和大家分享下。
自從有了gold procedures包后，我就解壓到電腦C盤的某一個文件夾中了，后來系統改裝Win7了，再重裝Met/Cal，用電腦硬盤文件安裝程序，怎么也安裝不上，報如上錯誤。問了fluke技術支持，可能沒說清楚，也沒解決，只強調重裝。
今天偶爾查了https://community.flukecal.com網站，居然真的有收獲了。和大家分享下。用電腦中gold procedures直接安裝校準程序時得尤其注意如下紅色部分。
難怪其原文題目就是讓刻錄光盤，這樣紅色部分的文件就在根目錄了。同理將這兩個文件直接copy至C盤根目錄下，亦可行！哦了！

原文 Alternatives to burning the MET/CAL Gold Procedure CD

The procedure CD image is available for download from the https://support.fluke.com/
> Met/Support site. The CD image is an ISO image
with the .iso extension such as "METCAL_Procedures_2012-03-16.iso". When you download the CD image, it is best to verify that it downloaded correctly by ensuring the MD5 checksum value matches. A couple of good MD5 programs are WinWD5 Free
and WinMD5Sum
. If you want to burn the CD image to a CD, ImgBurn
is free and works great. An alternative to burning the CD is to use a program that creates a virtual drive. I highly recommend installing and using SlySoft Virtual CloneDrive
.
If you can't burn the CD or use a virtual drive, another alternative is to "unzip" the contents of the CD. Some users like putting the contents of the CD on a USB stick or shared folder. A good free program that can do this is 7-Zip
. There is a catch, mcz.exe and the "jar" folder must be in a root directory for it to be found. If you get the error "Unable to find mcz.exe", this means that mcz-install.exe was not able to find mcz.exe on any drive, such as F:\mcz.exe. If you get an error such as "mcz.exe found in: F:\ java.lang.NoClassDefFoundError: com/fluke/metcal/zip/Mcz", this probly means that the "jar" folder is missing.

謝謝分享。

哈哈，我都用DEAMON TOOLS虛擬目錄，不解壓ISO，所以也沒遇到過這個問題。漲經驗值了，呵呵。