不知道有沒有熟悉MID 電能表標準的朋友,有一個疑問如下:
在 EN50470-3:2006 中,第8條款8 Accuracy requirements and tests中
8.1 Limits of percentage error due to variation of the load
Table 4 – Percentage error limits at reference conditions
(single-phase meters and polyphase meters with balanced loads)
8.4 Maximum permissible error (MPE)
Table 8 – Maximum permissible error (MPE)
對于同一級別的電能表,例如 CLASS B,其最大允許誤差究竟是按 Table4 還是按Table8來確定?
有一款1級表,按國標和IEC標準,MPE=1%,但在做MID CLASS B的認證時,被告知這塊表的MPE=3.5%, 因為工作溫度為40-55度,似乎是按Table8來取的。
MID 的CLASS A, B, C,D與國標或IEC 的電能表等級之間,以及最大允許誤差MPE之間有對應關系么? |
|